MANUFACTURE OF A DIE PROTOTYPE FOR DIDACTIC PURPOSES IN MECHATRONIC ENGINEERING

MONTIJO-VALENZUELA, ELIEL EDUARDO; DURAN-JIMENEZ , SAUL DANIEL; ALTAMIRANO-RÍOS, LUIS ALBERTO; PÉREZ-GÓMEZ, JOSÉ ISAEL; SALMÓN-AROCHI , OSCAR

Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/20.500.12984/5410

Registro completo de metadatos

Metadado	Valor	Lengua/Idioma
dc.creator	MONTIJO-VALENZUELA, ELIEL EDUARDO	-
dc.creator	DURAN-JIMENEZ , SAUL DANIEL	-
dc.creator	ALTAMIRANO-RÍOS, LUIS ALBERTO	-
dc.creator	PÉREZ-GÓMEZ, JOSÉ ISAEL	-
dc.creator	SALMÓN-AROCHI , OSCAR	-
dc.date	2020-12-31	-
dc.identifier	https://revistainvestigacionacademicasinfrontera.unison.mx/index.php/RDIASF/article/view/341	-
dc.identifier.uri	http://hdl.handle.net/20.500.12984/5410	-
dc.description	The objective of this research is to manufacture a prototype of a teaching die for the specialty of precision mechanical design in mechatronic engineering, in order to achieve the skills required in unit two, regarding dies. The methodology used consists of five stages: 1. Definition of the preliminary conditions. 2. Theoretical calculations for die design. 3. Design, modeling and assembly using computer-aided software (CAD) of the parts that make up the die. 4. Validation with simulation of finite element analysis (AEF). 5. Manufacture of parts and physical assembly of the die. A functional prototype was obtained with which the teacher and student can perform calculations, designs and CAD models, AEF analysis of the static and fatigue type, manufacture of rapid prototypes using 3D printing, the identification of the parts that make up a die and their functioning. The advantage of this prototype, compared to metal die-cutting machines, is its low cost of production and manufacturing, it does not require expensive and specialized machinery for manufacturing, specific designs can be made by the students and its subsequent manufacture within the laboratories of the Technological Institute of Hermosillo.	es-ES
dc.format	application/pdf	-
dc.language	spa	-
dc.publisher	UNIVERSIDAD DE SONORA	es-ES
dc.relation	https://revistainvestigacionacademicasinfrontera.unison.mx/index.php/RDIASF/article/view/341/312	-
dc.rights	Derechos de autor 2020 ELIEL EDUARDO MONTIJO-VALENZUELA; SAUL DANIEL DURAN-JIMENEZ ; LUIS ALBERTO ALTAMIRANO-RÍOS, JOSÉ ISAEL PÉREZ-GÓMEZ, OSCAR SALMÓN-AROCHI	es-ES
dc.source	Revista de Investigación Académica Sin Frontera: División de Ciencias Económicas y Sociales; Núm. 33 (14): Julio - Diciembre 2020; 1-40	es-ES
dc.source	2007-8870	-
dc.source	10.46589/rdiasf.vi33	-
dc.subject	Prototype	es-ES
dc.subject	didactic	es-ES
dc.subject	die	es-ES
dc.title	MANUFACTURE OF A DIE PROTOTYPE FOR DIDACTIC PURPOSES IN MECHATRONIC ENGINEERING	es-ES
dc.type	info:eu-repo/semantics/article	-
dc.type	info:eu-repo/semantics/publishedVersion	-
Aparece en las colecciones:	REVISTA DE INVESTIGACIÓN ACADÉMICA SIN FRONTERA